For admission: 900-362-5277 / 994-047-1271

Contact: +91 9952971485

Email : office@adhi.edu.in

Mechanical Engineering

CSE- ABOUT IMAGE

About Mechanical Engineering

The Mechanical Engineering department is a major branch of ACET, It offers comprehensive Undergraduate&Post Graduate Curricula to the students as per Anna University norms in respect of both the theoretical and practical aspects of the course. A team of well trained faculties are doing their best to promote the developmentt to a higher level.

The Mechanical Engineering Department work together in a cordial atmosphere to the achievement of excellence in education.Our Classes promote frequent, direct interaction between professors andstudents, greatly enhancing the learning process.

Laboratory courses in several mechanical engineering areas provide intensive experience in experiments/data Design, measurements and analysis. Students receive experience in designing through in our CAD/CAM lab..

The entire department is committed to excellence in Engineering education, and the broader development and welfare of its students. We are confident that who have a flair students will be delighted with the student-focused environment and total educational experience that we offer, we are sure that we can be of assistance with your educational goals, with your research or consultant needs, or in any other way.

Vision

The Department of Mechanical Engineering is a premier department educating high quality engineers to serve the diverse needs of our changing society. The department has a well-funded, high quality research environment,so as to depart a well trained students community to face the needs of this competitive world. The department has strong, dynamic alliances with industries, alumni, other departments and the community.

Mission

1.Our mission is to promote the well-being of students society through excellence in teaching, research and service to the needs of rapidly changing technical diversity of mechanical engineering.

2.To impart quality education to the students to build their capacity and to enhance their skills to make them globally competitive mechanical engineers.

3.To develop linkages with Industries and various educational institutions for excellence in teaching, research and consultancy practices.

PEO, PO, PSO

Vision:

To provide quality education for The effective efforts made to standardize the technical knowledge and productivity in terms of achieving the prominence expertise through education, practice and contribution also to reach out the widespread altitude through excellence by anticipating the technical intensification for global aspects.

Mission:

To adopt the emerging technologies and advancement in engineering through a systematic procedure would be procured.

The goal is to evolve the design, simulate and analyze the product as well as process using appropriate advanced software.

The objective is to establish the creative skills towards research and product development for industrial applications.

The department focuses to generate the energy from unconventional sources like solar and wind are being carried out through new ideas, methodology and innovative tasks.

The aim to provide a personality with a complete managerial administrative and expert in emerging technology added to have the potential such as social vision and moral to a global society.

PEO 1:

The graduate will be efficient in understanding the engineering basics and technical information represented by symbol and to find the various projections of the object. Proficient knowledge to analyze machines and their parts through technical drawings and graphical presentation.

PEO 2:

The graduate has the ability to generate the technical ideas in terms of basic components and linkage of systems, displacement, and acceleration mechanism added with depth of knowledge about kinetics and kinematics of machine, friction and vibrations.

PEO 3:

The graduate has adequate knowledge on latest techniques in manufacturing process to carry out the new materials with improved physical mechanical and thermal properties.

PEO 4:

The graduate has improved administrative and managerial proficiencies to employ in the organization, especially to improve the productivity by reducing the loss of cost through the optimum utilization of resources such as time and man power by effective methodology.

Engineering Graduates will be able to:

1. Analysis skills: The approach is used to find the solution in terms of dimension, mechanism, product and process of a particular part in an efficient way.

2. Design expertise: A sequence of appropriate technical procedures designed to making out a product.

3. Evaluation of technical problem: Aware about the technical issues is essential to resolve the problems.

4. Advance Materials and applications:Ability to find out the improved mechanical properties by the addition of new material with existing make through modern advanced manufacturing techniques.

5. Mechanical behavior of Materials: The knowledge about mechanical properties and deformation mechanism of the materials would be acknowledged.

6. Global technical knowledge: Acquire a comprehensive need and requirement of a product outcome in order to find the solutions for the particular application.

7. Research and Development: The innovative ideas and methodology would be followed through a systematic investigation into materials and process in order to find the facts to attain new conclusions.

8. Upgrading emerging technology:Automation in manufacturing industries, Nano technology in materials is essential to enrich the technical advancement.

9. Process Planning Activities: Quality and standard of operations, reliability and service life durability of the process will be accomplished through the activities.

10. Project Management: The discipline makes true the initiation, execution and organizing a multi task towards goal in a time and cost-effective manner.

11. Cost Effective Analysis: A focus which needs to understand the material, market and resources of the products in a view of costs and benefits, including indirect and longer-term effects.

12. Universal Standard Codes for process Selection: The knowledge of common coding system which represents the product and process details along with material properties.

Should have knowledge to analyze the system material process from drawing interpretation.

Should have extended knowledge about solid and fluid mechanics and thermal properties of different materials.

Should be expert in Software tools which is to be analyze and simulate the process would be represent the real time experimental results.

List of Labs

Mech- Lab IMAGE
  • CAD/CAM LAB
  • DYNAMICS LAB
  • FLUID MECHANICS AND MACHINERY LAB
  • MECHATRONICS LAB
  • HEAT TRANSFER LAB
  • METROLOGY AND MEASUREMENT LAB
  • MANUFACTURING TECHNOLOGY LAB
  • STRENGTH OF MATERIALS LAB
  • THERMAL LAB

Faculty Profile

Head of the Department

Dr.D.PALANISAMY
Head of the Department
Department of Mechanical Engineering
Adhi College of Engineering and Technology
Sankarapuram, Kancheepuarm- 631605.
E- Mail:palanisamy.mech@adhi.edu.in

Faculty Details

SI.NO. NAME OF THE STAFF QUALIFICATION DESIGNATION E-MAIL ID PROFILE DETAILS
1 Dr.DEVARAJU.A B.E(Mech), M.Tech (ECM), Ph.D Professor principal@adhi.edu.in View Profile
2 Dr.PARANTHAMAN.V B.E(Mech), M.Tech, Ph.D Professor vp@adhi.edu.in View Profile
3 Dr.PALANISAMY.D B.E(Mech), M.Tech (MFG), Ph.D Asso.Prof palanisamy.mech@adhi.edu.in View Profile
4 Mr.PERIYARDHASAN.R B.E(Mech), M.E(CAD), (Ph.D) Asst.Prof periyardasan.mech@adhi.edu.in View Profile
5 Mr.HARIKUMAR.R B.E(Mech), M.E(CAD/CAM),(Ph.D) Asst.Prof. harikumar.mech@adhi.edu.in View Profile
6 Mr.Prabhu.R B.E (Mech), M.E (Printing and Packaging Tech), (Ph.D) Asst.Prof. prabu.mech@adhi.edu.in View Profile
7 Mr.GOPI.R B.E(Mech), M.E(TE),(Ph.D) Asst.Prof. gopi.mech@adhi.edu.in View Profile
8 Mr.RAJI.A B.E(Mech), M.E(TE),(Ph.D) Asst.Prof. raji.mech@adhi.edu.in View Profile
9 Mr.FANTIN AROKIA RAJ.A B.E(Mech), M.E(ED),(Ph.D) Asst.Prof. fantinarokiaraj.mech@adhi.edu.in View Profile
10 Mr.MURALI.P B.E(Mech), M.E(TE) Asst.Prof. murali.mech@adhi.edu.in View Profile
11 Mr.UMAPATHI.D B.E(Mech), M.E(TE) Asst.Prof. umapathi.mech@adhi.edu.in View Profile
12 Mr.JEYAPRAKASH.P B.E(Mech), M.E(ED) Asst.Prof. jeyaprakash.mech@adhi.edu.in View Profile
13 Mr.KUMARAVEL.P B.E(Mech), M.E(IC) Asst.Prof. kumaravel.mech@adhi.edu.in View Profile
14 Mr.RAMKUMAR.S B.E(Mech), M.E(ED) Asst.Prof. ramkumar.mech@adhi.edu.in View Profile
15 Mr.PRABAKARAN.R B.E(Mech), M.E(AE) Asst.Prof. prabakaran.mech@adhi.edu.in View Profile
16 Mr.KARTHIKEYAN.D B.E(Mech), M.E(ED) Asst.Prof. karthikeyan.mech@adhi.edu.in View Profile
17 DR. MURUGANANDAM D B.E(MECH),M.E(CAD),PHD Professor muruganandam.mech@adhi.edu.in View Profile
SI.NO. NAME QUALIFICATION DESIGNATION E-MAIL ID PROFILE DETAILS
1 Dr.SARAVANAN.I B.E(Mech), M.E(Manu), (Ph.D) Professor saravanan.mech@adhi.edu.in View Profile
2 Mr.SIVASAMY.P B.E(Mech), M.E(ED),(Ph.D) Asst.Prof. sivasamy.mech@adhi.edu.in View Profile
3 Mr.GOPINATH.D B.E(Mech), M.E(ED) Asst.Prof. gopinath.mech@adhi.edu.in View Profile
4 Mr.Prasanth.L B.E(Mech), M.E(ED), Asst.Prof. prasanth.mech@adhi.edu.in View Profile
SI.NO. NAME QUALIFICATION DESIGNATION E-MAIL ID
1 Mr.VENKATESAN.S D.M.E Lab Instructor Venkatesan.li@adhi.edu.in
2 Mr.SRINIVASAN.R I.T.I Lab Instructor srinivasan.li@adhi.edu.in
3 Mr.THANIKACHALAM.N SSLC Technical Assistant thanikachalam.li@adhi.edu.in
4 Mr.KANNAN.B I.T.I Lab Instructor kannan.li@adhi.edu.in
Show more
Show less

SYLLABUS

Calendar & Syllabus


Department Calendar 2017-2018 for Odd & Even Semester.

2013 Regulation Syllabus for B.E - MECH.

2013 Regulation Syllabus for M.E - Engineering Design

STUDENT TOPPERS LIST

SI.NO. REG.NO. NAME YEAR CGPA
1 410116114009 Cheziyan S II 8.73
2 410116105011 Saipritha L II 8.69
3 410116114030 Manoj C B II 8.46
SI.NO. REG.NO. NAME YEAR CGPA
1 410115114076 Vanitha Y III 9.25
2 410115114020 Gayathri R III 9.13
3 410115114022 Gowri Priyadharsini K.S III 8.75
SI.NO. REG.NO. NAME YEAR CGPA
1 410114114026 Iyappan P IV 9.22
2 410114114067 Rajalakshmi V IV 8.96
3 410114114094 Venkatesan K IV 8.83

PROFESSIONAL BODIES


MECH department is having two professional bodies SAE and IWS:

Society of Automotive Engineers (SAE):

SAEINDIA is a leading resource for mobility technology in India. As an individual member driven society of mobility practitioners the ownership of SAEINDIA wrests with its members who are Individuals from the mobility community, which includes Engineers Executives from Industries, Government Officials, Academicians and Students.

SAEINDIA is an affiliate society of SAE,Internationally registered body in India,as an Indian non-profit engineering and scientific society dedicated to the advancement of mobility industry in India.

The officers in Governing Boards, Operating boards and Committees share the responsibility of its efficient functioning here.Now all efforts are on with a single minded purpose to propel the automotive engineering profession by focusing on three trends occurring in the automotive industry today that affect all automotive engineers and engineering societies.

The first of these trends is simultaneous integration of the roles of design engineer, manufacturing engineer, supplier, marketer, and planner. The second trend is the reliance of auto manufacturers on suppliers and design houses to support the design and manufacturing functions. A third factor crucial to an internationalized auto industry in standards as communication, as a basis for regulation, and as an aid to interchangeability.

Global standards have become a necessity, and the responsibility for developing them,falls on the individual engineers who participate in standards work.

During its hundred plus years, the automotive industry has achieved remarkable progress in both production output and technological development. However, associated with this progress has been a slight yet noticeable lag in the level of technological development as compared to the increase in production volume.

The founding principle of the SAE International is to unite scientific and technical staff to perform free academic discussions, to dedicate themselves to the cause of prospering the science and technology for automotive vehicles and to make contributions to speed up the modernization of automotive industry.

A great deal of effort has been expended to make these definitions suit this purpose. It is recognized quite well by both SAEINDIA and SAE International,which keep on raising its bar on standards like linguistic dictionaries; even our efforts and purpose must be revised periodically to reflect current usage and changing needs.



Indian Welding Society (IWS):

The objectives of IWS are as follows:

1. To promote the advancement of Welding, Cutting, Reclamation, Hard Facing and related technologies and other allied sciences which the Society may decide from time to time.

2. To facilitate exchange of ideas, information, development work etc. amongst members; by organising lectures, workshops, seminars, symposia, conferences and development programs; publish periodicals, books, journals, and magazines; and develop software and educational programs, video films and training packages relating to the objectives of the Society.

3. To offer flexible class room/distance learning programs in various aspects of welding & related technology that suit the requirement of various levels.

4. To promote professional exchange of information, experience and advanced training within and among various countries across the globe.

5. To enter into arrangements for providing members of the Society with advice and assistance on all matters connected with the objects covered by this Memorandum.

6. To admit any person(s) to be Honorary Member(s) of the Society on such terms, and to confer on them such rights and privileges, as may seem expedient.

7. To approach, negotiate, confer with and/or act in any advisory capacity Government, Municipal and Local Authorities, and various economic segments/industries with respect

8. To the objects covered by this Memorandum with a view to offer consultancy / advice to industry and other segments of the country's economy.

9. To give awards, scholarships, fellowships, and grants to individuals/teams of professionals and organisations in regard to specific projects in various spheres of welding & related technology directly or in association with other professional organisations having similar objectives.

10. To make such rules, regulations and bye-laws as may from time to time be necessary for carrying out the above objects or otherwise.

11. To make efforts to introduce Energy efficient and non-polluting technologies for a cleaner environment.

12. To provide Training and education of rural youth to help them settle for a quality Life.

13. To promote any other activity incidental to the above objects but not involving the carrying on of any activity for profit as the Governing Council from time to time determine.

GUEST VISITED

S.NO DATE GUEST VISITED PURPOSE
1 16.03.2018 Dr. R. Prakash, Associate Professor, VIT University One Day National Conference - RSMME
2 01.03.2018 Dr.A. Elaya Perumal, Professor and Director for Students Affairs, Anna University,Chennai Cheif guest for the Mechanical Symposium - Mechignitro '18
3 04.08.2017 Dr.N.Manikandan, Ph.D, Associate Professor, Sree Vidyanikethan Engineering college, Tirupathi One Day Workshop on “Design Of Experiments and Intelligent Decision Making Tools"
4 17.07.2017 Dr.P.Sathiya ,Ph.D, Associate Professor, NIT,Trichy One Day Workshop on “Advanced Metal Joining Process for Smart Materials”
5 11.07.2017 Dr.R.Karunakaran, Dean and Professor University college of Engineering,Kanchipuram. Intra College Level Symposium “Mechstorm-2k17”
6 10.07.2017 Dr.V. Anandakrishnan,Ph.D., Assistant Professor,Department of Production Engineering, NIT, Trichy Guest Lecture on “Powder to Products”
7 27.06.2017 Mr. Suburaj, Center Manager, CADDAM Technologies Pvt. Ltd,Tambaram. Workshop on “Product Design And Additive Manufacturing using 3d Printer”
8 3.5.2017 to 5.5.2017 Mr.Krishna Chaitanya, Application Engineer from ARK Info Solutions, Hyderabad, Telangan
Dr.Tamiru Demsis,Academic Vice-President,Wolkite University,Ethiopia.
Dr. David Juarez Romero
Dr. S. Kalaiselvam, Head,Department of AppliedScience and Technology,Anna University, Chennai
Dr. P.Suresh, Department of Mechanical Engineering, NIT Trichy.
1st International conference on Advanced Functional Materials(ICAFM - 2017)
9 10.03.2017 & 11.03.2017 Mr.Krishna Chaitanya, Application Engineer from ARK Info Solutions, Hyderabad, Telangana. Skill Development Program (SDP) on FEA & CFD Using Ansys
10 25.02.2017 Dr.S.EArumugamm, Ph.D., Associate Professor, Department of Mechanical Engineering, SCSVMV University, Kancheepuram Guest Lecture on Biolubricant and Biodiesel from Rapeseed Oil
11 16.01.2017 Dr.P.Muthukumar ME,Ph.D,Professor,Department of Mechanical Engineering, Indian Institute of Technology, Guwahati Guest Lecture on Energy Efficiency And Green Energy Technologies
12 10.09.2016 Mr.Pradeep, Chaiman of SAE Mahindra &
Mr.Balasubramainiyan
Inaugural Function of SAE India
13 25.08.2016 Mr.C.Jayakumar,B.E.,M.O.T.,D.I.S., Deputy Director Guest Lecture on Job Opportunities for Mechanical Engineering in Private and Government Sectors
14 06.08.2016 Mr.Om Ariara Gugan, Project Manager, Hinduja Tech. Ltd., Guest lecture on Automobile - After Treatment System

Publications

  • Kumar RA, Devaraju, A Modeling of Mechanical Properties and High Temperature Wear Behavior of Al7075/SiC/CRS Composite Using RSM. Silicon. 2020 Nov 9:1-21.
  • Palanisamy D, Balasubramanian K, Manikandan N, Arulkirubakaran D, Ramesh R. Machinability analysis of high strength materials with Cryo-Treated textured tungsten carbide inserts. Materials and Manufacturing Processes. 2019 Apr 4;34(5):502-10.
  • Sivasamy P, Harikrishnan S, Hussain SI, Kalaiselvam S, Babu LG. Improved thermal characteristics of Ag nanoparticles dispersed myristic acid as composite for low temperature thermal energy storage. Materials Research Express. 2019 May 24;6(8):085066.
  • Balasubramanian K, Nataraj M, Palanisamy D. Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites. Materials and Manufacturing Processes. 2019 Sep 9;34(12):1389-400.
  • Saravanan I, Devaraju A. Wear mechanism of UHMWPE polymer composites for bio medical applications. Materials Research Express. 2019 Sep 6;6(10):105355.
  • Manikandan N, Balasubramanian K, Palanisamy D, Gopal PM, Arulkirubakaran D, Binoj JS. Machinability Analysis and ANFIS modelling on Advanced Machining of Hybrid Metal Matrix Composites for Aerospace Applications. Materials and Manufacturing Processes. 2019 Dec 10;34(16):1866-81.
  • Sivasamy P, Harikrishnan S, Jayavel R, Hussain SI, Kalaiselvam S, Lu L. Preparation and thermal characteristics of caprylic acid based composite as phase change material for thermal energy storage. Materials Research Express. 2019 Aug 23;6(10):105051.
  • Manikandan N, Arulkirubakaran D, Palanisamy D, Raju R. Influence of wire-EDM textured conventional tungsten carbide inserts in machining of aerospace materials (Ti–6Al–4V alloy). Materials and Manufacturing Processes. 2019 Jan 2;34(1):103-11.
  • Paranthaman V, Sundaram KS, Jebaraj AV. Analysis of structure property relationship of super duplex stainless steel AISI 2507 weldments for severe corrosive environments. Materials Research Express. 2018 Aug 17;5(9):096527.
  • Palanisamy D, Senthil P. A Comparative study on machinability of cryo-treated and peak aged 15Cr-5Ni precipitation hardened stainless steel. Measurement. 2018 Feb 1;116:162-9.
  • Palanisamy D, Senthil P. Development of ANFIS model and machinability study on dry turning of cryo-treated PH stainless steel with various inserts. Materials and Manufacturing Processes. 2017 Apr 26;32(6):654-69.
  • Harikrishnan S, Hussain SI, Devaraju A, Sivasamy P, Kalaiselvam S. Improved performance of a newly prepared nano-enhanced phase change material for solar energy storage. Journal of Mechanical Science and Technology. 2017 Oct 1;31(10):4903-10.
  • Saravanan I, Perumal AE, Issac RF, Vettivel SC, Devaraju A. Optimization of wear parameters and their relative effects on TiN coated surface against Ti6Al4V alloy. Materials & Design. 2016 Feb 15;92:23-35.
  • Palanisamy D, Senthil P. Machinability study of laser surface treated 15-5 PH stainless steel. Materials and Manufacturing Processes. 2016 Oct 2;31(13):1755-62.
  • Devaraju A, Rajendran P, Perumal AE, Saravanan I. Investigation of temperature influence in wear studies on nitride coatings. Materials Today: Proceedings. 2020 Jan 1;22:1167-74.
  • Manikandan N, Raju R, Palanisamy D, Binoj JS. Optimisation of spark erosion machining process parameters using hybrid grey relational analysis and artificial neural network model. International Journal of Machining and Machinability of Materials. 2020;22(1):1-23.
  • Arivazhagan R, Geetha NB, Sivasamy P, Kumaran P, Gnanamithra MK, Sankar S, Loganathan GB, Arivarasan A. Review on performance assessment of phase change materials in buildings for thermal management through passive approach. Materials Today: Proceedings. 2020 Jan 1;22:419-31.
  • Palanisamy D, Manikandan N, Binoj JS, Ramesh R, Narayana TS. Performance comparison of artificial neural network and multiple regression models for wire electrical discharge machining of haste alloy. Materials Today: Proceedings. 2020 Sep 12.
  • Sivakumar S, Palanisamy P, Baluchamy A. Experimental investigation on Jatropha oil Methyl Ester fuelled CI engine using high EGR. Materials Today: Proceedings. 2020 Jul 30.
  • Palanisamy D, Manikandan N, Ramesh R, Devaraju A, ArulKirubakaran D. Development of neural network models for wire electrical discharge machining of Haste alloy. Materials Today: Proceedings. 2020 Sep 12.
  • Devaraju A, Sivasamy P, Loganathan GB. Mechanical properties of polymer composites with ZnOnano-particle. Materials Today: Proceedings. 2020 Jan 1;22:531-4.
  • Palanisamy D, Manikandan N, Ramesh R, Binoj JS, Arulkirubakaran D. Development of Grey-ANFIS Model for Wire Electrical Discharge Machining of Al-GNP Composites. Materials Today: Proceedings. 2020 Aug 19.
  • Paranthaman V, Dhinakaran V, Sai MS, Devaraju A. A systematic review of fatigue behaviour of laser welding titanium alloys. Materials Today: Proceedings. 2020 Sep 24.
  • Palanisamy D, Manikandan N, Ramesh R, Binoj JS, Arulkirubakaran D. Development of Grey-ANFIS Model for Wire Electrical Discharge Machining of Al-GNP Composites. Materials Today: Proceedings. 2020 Aug 19.
  • Harikumar R, Devaraju A. Evaluation of mechanical properties of bamboo fiber composite with addition of Al2O3 nano particles. Materials Today: Proceedings. 2020 Oct 8.
  • Palanisamy D, Britto AS, Binoj JS, Manikandan N. Statistical optimization of parameters for enhanced properties of diffusion bonded AA6061 and AA 7075 aluminium alloys. Materials Today: Proceedings. 2020 Sep 9.
  • Gopi R, Saravanan I, Devaraju A, Ponnusamy P. Tribological behaviour of thermal sprayed high velocity oxy-fuel coatings on tungsten carbide–A review. Materials Today: Proceedings. 2020 Aug 11.
  • Varoon GM, Augstine BM, Gopi R. Microstructure and mechanical properties of friction stir welded AL6061 and AL5058. Materials Today: Proceedings. 2020 Jan 1;22:1140-3.
  • Palanisamy D, Devaraju A, Arulkirubakaran D, Manikandan N. Experimental investigation on surface integrity during machining of AISI 420 steel with tungsten carbide insert. Materials Today: Proceedings. 2020 Jan 1;22:992-7.
  • Umapathi D, Devaraju A, Rathinasuriyan C, Raji A. Mechanical and tribological properties of electroless nickel phosphorous and nickel Phosphorous-Titanium nitride coating. Materials Today: Proceedings. 2020 Jan 1;22:1038-42.
  • Devaraju A, Murali P. Experimental investigation of mechanical and tribological properties of palm fiber composite with Al2O3 ceramic particles. Materials Today: Proceedings. 2020 Jan 1;22:1161-6.
  • Palanisamy D, Devaraju A, Manikandan N, Arulkirubakaran D. Performance evaluation of cryo-treated tungsten carbide inserts in machining PH stainless steel. Materials Today: Proceedings. 2020 Jan 1;22:487-91.
  • Gopi R, Saravanan I, Devaraju A. Investigation of shot peening process on stainless steel and its effects for tribological applications. Materials Today: Proceedings. 2020 Jan 1;22:580-4.
  • Palanisamy D, Devaraju A, Manikandan N, Balasubramanian K, Arulkirubakaran D. Experimental investigation and optimization of process parameters in EDM of aluminium metal matrix composites. Materials Today: Proceedings. 2020 Jan 1;22:525-30.
  • Harikumar R, Devaraju A. Exploration of mechanical properties of polyurea coated mild steel plate and aluminium plate sandwich composites. Materials Today: Proceedings. 2020 Jan 1;22:1144-8.
  • Thejasree P, Binoj JS, Manikandan N, Krishnamachary PC, Raju R, Palanisamy D. Multi objective optimization of wire electrical discharge machining on Inconel 718 using Taguchi grey relational analysis. Materials Today: Proceedings. 2020 Jul 30.
  • Saravanan I, Elayaperumal A, Devaraju A, Karthikeyan M, Raji A. Wear behaviour of electroless Ni-P and Ni-P-TiO2 composite coatings on En8 steel. Materials Today: Proceedings. 2020 Jan 1;22:1135-9.
  • Jeyaprakash P, Devaraju A. Prediction of effective elastic modulus for glass microspheres loaded polymer composites. Materials Today: Proceedings. 2020 Jan 1;22:492-8.
  • Lokesh P, Kumari TS, Gopi R, Loganathan GB. A study on mechanical properties of bamboo fiber reinforced polymer composite. Materials Today: Proceedings. 2020 Jan 1;22:897-903.
  • Muralikrishna MV, Kumari TS, Gopi R, Loganathan GB. Development of mechanical properties in banana fiber composite. Materials Today: Proceedings. 2020 Jan 1;22:541-5.
  • Harikrishnan S, Devaraju A, Kumar GR, Kalaiselvam S. Improved thermal energy storage behavior of a novel nanofluid as phase change material (PCM). Materials Today: Proceedings. 2019 Jan 1;9:410-21.
  • Harikrishnan S, Devaraju A, Sivasamy P, Kalaiselvam S. Experimental investigation of improved thermal characteristics of SiO2/myristic acid nanofluid as phase change material (PCM). Materials Today: Proceedings. 2019 Jan 1;9:397-409.
  • Saravanan I, Devaraju A. Wear mechanism of UHMWPE polymer composites for bio medical applications. Materials Research Express. 2019 Sep 6;6(10):105355.
  • Dhanraj S, Gopi R, Loganathan GB. An Efficiency Study On Water Extraction From Air Using Thermophoresis Method. InIOP Conference Series: Materials Science and Engineering 2019 Jul (Vol. 574, No. 1, p. 012003). IOP Publishing.
  • Devaraju A, Babu K, Gnanavelbabu A. Investigation on the mechanical properties of coconut bunch fiber reinforced epoxy with Al2O3 nano particles composites for structural application. Materials Today: Proceedings. 2018 Jan 1;5(6):14252-7.
  • Harikumar R, Devaraju A. Fabrication and experimental analysis of copper wire embedded with GFRP composites. Materials Today: Proceedings. 2018 Jan 1;5(6):14327-32.
  • Manikandan N, Raju R, Palanisamy D, Kumar S. Investigation on Ti6Al4V laser metal deposition using Taguchi based grey approach. Materials Today: Proceedings. 2018 Jan 1;5(6):14375-83.
  • Sivasamy P, Harikrishnan S, Devaraju A. Experimental investigation of improved thermal characteristics of Al2O3/barium hydroxide octa hydrate as phase change materials (PCMs). Materials Today: Proceedings. 2018 Jan 1;5(6):14440-7.
  • Palanisamy D, Devaraju A, Harikrishnan S, Manikandan N. Machinability studies on CNC turning of PH stainless steel with Coated Inserts. Materials Today: Proceedings. 2018 Jan 1;5(6):14520-5.
  • Saravanan P, Devaraju A. Improving mechanical properties of palm sheath composites using sodium hydroxide [naoh] treatment. Materials Today: Proceedings. 2018 Jan 1;5(6):14355-61.
  • Periyardhasan R, Devaraju A. Mechanical Characterization of Steel Wire Embeded GFRP Composites. Materials Today: Proceedings. 2018 Jan 1;5(6):14339-44.
  • Raju R, Manikandan N, Palanisamy D, Arulkirubakaran D, SambathKumar S, Prakash PB. Optimization of process parameters in electrical discharge machining of haste alloy C276 using Taguchi’s method. Materials Today: Proceedings. 2018 Jan 1;5(6):14432-9.
  • Saravanan M, Devaraju A, Venkateshwaran N, Krishnakumari A, Saarvesh J. A review on recent progress in coatings on AISI austenitic stainless steel. Materials Today: Proceedings. 2018 Jan 1;5(6):14392-6.
  • Nataraj M, Balasubramanian K, Palanisamy D. Influence of Process Parameters on CNC Turning of Aluminium Hybrid Metal Matrix Composites. Materials Today: Proceedings. 2018 Jan 1;5(6):14499-506.
  • Prabhu R, Devaraju A. Developing an antimicrobial packaging to improve the shelf life of meat using silver zeolite coating on BOPP film. Materials Today: Proceedings. 2018 Jan 1;5(6):14553-9.
  • Nataraj M, Balasubramanian K, Palanisamy D. Optimization of machining parameters for CNC turning of Al/Al2O3 MMC using rsm approach. Materials Today: Proceedings. 2018 Jan 1;5(6):14265-72.
  • Sivasamy P, Devaraju A, Harikrishnan S. Review on heat transfer enhancement of phase change materials (PCMs). Materials Today: Proceedings. 2018 Jan 1;5(6):14423-31.
  • Devaraju A, Sivasamy P. Comparative analysis of mechanical characteristics of sisal fibre composite with and without nano particles. Materials Today: Proceedings. 2018 Jan 1;5(6):14362-6.
  • Jeyaprakash P, Prabhakaran V, Devaraju A. Experimental and numerical analysis of carbon epoxy fibre composite under buckling load. Materials Today: Proceedings. 2018 Jan 1;5(6):14526-30.
  • Paranthaman V, ShanmugaSundaram K. Assessment of Dissimilar Weld Between Duplex Stainless Steel Grades for Severe Corrosive Applications. InASME International Mechanical Engineering Congress and Exposition 2017 Nov 3 (Vol. 58356, p. V002T02A090). American Society of Mechanical Engineers.
  • Gopi R. Experimental investigation of flat plate collector with cylindrical fins in a solar air heater. J Indus Pollut Control. 2017;33(2):1128-31.
  • Palanisamy D, Senthil P, Senthilkumar V. The effect of aging on machinability of 15Cr-5Ni precipitation hardened stainless steel. Archives of Civil and Mechanical Engineering. 2016 Mar;16:53-63.
  • Devaraju A, Pazhanivel K. Evaluation of microstructure, mechanical and wear properties of aluminium reinforced with boron carbide nano composite. Indian Journal of Science and Technology. 2016 May;9(2):1-6.
  • Palanisamy D, Senthil P. Optimization on turning parameters of 15-5PH stainless steel using Taguchi based grey approach and Topsis. Archive of Mechanical Engineering. 2016;63(3):397-412.
  • Devaraju A, Periyardhasan R. Fabrication and characterization of steel wire embedded GFRP composites. Journal of Chemical and pharmaceutical Sciences. 2016;10:981-4.

List of International Journal Publications
(Affiliated to Adhi College of Engineering and Technology)

  • G. Sriharan, S. Harikrishnan “Improved Performance of Composite Phase Change Material for Thermal Energy Storage” Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • D.Arulkirubakaran, V.Senthilkumar, S.Dinesh, C.Velmurugan, N.Manikandan, Ramesh Raju “Effect of Textured Tools on Machining of Ti-6Al-4V Alloy under Lubricant Condition” Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • R.Ashok Kumar, A.Devaraju, S.Arunkumar “Experimental Investigation on Mechanical Behaviour and Wear Parameters of TiC and Graphite Reinforced Aluminium Hybrid Composites”, Materials Today: Proceedings , 2018. (SCOPUS & Web Of Science).
  • Devaraju. A, Babu. K, Gnanavelbabu A “Investigation on the Mechanical properties of Coconut Bunch fiber Reinforced Epoxy with Al2O3 Nano particles Composites for Structural Application”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • S.Babu sasi kumar, M.Chinnapandian “Experimental investigation on freezing/melting characteristics of two different Phase change materials”, Materials Today: Proceedings , 2018. (SCOPUS & Web Of Science).
  • R.Harikumar, A. Devaraju “Fabrication and Experimental Analysis of Copper Wire Embedded with GFRP Composites”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • P. Rajendran, A. Devaraju “Experimental Evaluation of Mechanical and Tribological Behaviours of Gas Nitride treated AISI 316LN Austenitic Stainless Steel”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • R. Periyardhasan and A. Devaraju “Mechanical Characterization of Steel Wire Embeded GFRP Composites”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • P. Saravanan, A. Devaraju “Improving Mechanical Properties Of Palm Sheath Composites Using Sodium Hydroxide [Naoh] Treatment”, Materials Today: Proceedings , 2018. (SCOPUS & Web Of Science).
  • A.Devaraju*, P. Sivasamy “Comparative Analysis of Mechanical Characteristics of Sisal Fibre Composite with and without Nano Particles”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • P. Sivasamy, A. Devaraju, S. Harikrishnan “Review on Heat Transfer Enhancement of Phase Change Materials (PCMs)”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • P. Sivasamy, S. Harikrishnan*, A. Devaraju, “Experimental Investigation of Improved Thermal Characteristics of Al2O3/Barium Hydroxide Octa Hydrate as Phase Change Materials (PCMs)” , Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • P. Jeyaprakash*, V. Prabhakaran, A. Devaraju “Experimental and Numerical Analysis of Carbon Epoxy Fibre Composite under Buckling Load”, Materials Today: Proceedings , 2018. (SCOPUS & Web Of Science).
  • M. Nataraj, K. Balasubramanian, D.Palanisamy “Influence of Process Parameters on CNC Turning of Aluminium Hybrid Metal Matrix Composites” , Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • D.Palanisamy*, A. Devaraju, S. Harikrishnan, N.Manikandan “Machinability Studies on CNC Turning of PH Stainless Steel with Coated Inserts”, Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • R.Prabhu, A. Devaraju “Developing an Antimicrobial Packaging to Improve the Shelf Life of Meat Using Silver Zeolite Coating on BOPP Film” , Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).
  • Saravanan M , Devaraju A, Venkateshwaran N, Krishnakumari A, Saarvesh J “A review on recent progress in coatings on AISI austenitic stainless steel” , Materials Today: Proceedings, 2018. (SCOPUS & Web Of Science).

  • Harikrishnan,S, Imran Hussain,S, Devaraju, A, Sivasamy, PandKalaiselvam, S. “Improved performance of a newly prepared nano-enhanced phasechange material for solar energy storage”, Journal of Mechanical Science and Technology,Springer publications, Vol. 31 No.10, (2017) pages. 4903-4910 (Listed in Anna University Annexure). CLICK HERE
  • Saravanan,M, Venkateshwaran,N,Devaraju, A and Krishnakumari, A “Tribologicalbehavior of thin nano tungsten carbide film deposited on 316L Stainless Steel surface”, Surface Review and Letters, (2017) pages.71-80(Listed in Anna University Annexure). CLICK HERE
  • Saravanan,M, Venkateshwaran,N,Devaraju, A, Krishnakumari, A and Saarvesh, J. “Surface Modification of 316L Stainless Steel by Plasma- Assisted Carburizing Process” , Surface Review and Letters, Vol.24, No. 8 (2017) pages. 1-6 (Listed in Anna University Annexure). CLICK HERE
  • Saravanan, I., Elayaperumal, A., Franklin Issc, S., Vettivel, S.C. and Devaraju, A.“Optimization of wear parameters and their relative effects on TiN coated surface against Ti6Al4V alloy”, Materials & Design, Elsevier publications, Vol. 92, pages. 23-35, (2016). (Listed in Anna University Annexure). CLICK HERE
  • Palanisamy, D and Senthil, P. “ A comparative study on machinability of cryo-treated and peak aged 15Cr- 5Ni precipitation hardened stainless steel” ‘Measurement’ Elsevier publicationsVolume 116, (2018), pages. 162-169(Listed in Anna University Annexure). CLICK HERE
  • Anandhi, P, JawaharV,Senthil Kumar, and Harikrishnan,S.“Enhanced capacitive characteristics of TiO2nanoflakes based electrode material for supercapacitor”, Journal of Electrical Engineering.,(2016),pages. 1-7. (Listed in Anna University Annexure). CLICK HERE
  • Devaraju, A. “A Review on Important Factors Affecting dry Sliding Friction”, Journal of Surface Science and Technology, Vol. 32(3–4), pages. 71–76, (2016) (Scopus Indexed Journal). CLICK HERE
  • Devaraju, A and Pazhanivel, K. “Evaluation of Microstructure, Mechanical and Wear Properties of Aluminium Reinforced with Boron Carbide Nano Composite”, Indian Journal of Science and Technology,Vol. 9(2), pages. 1-6, (2016) (Scopus Indexed Journal). CLICK HERE
  • Devaraju, A and Periyardhasan, R. “Fabrication and Characterization of Steel Wire Embeded GFRP Composites”, Journal of Chemical and Pharmaceutical Sciences, Vol. 9, Issue 2, pages. 981-984, (2016) (Scopus Indexed Journal). CLICK HERE
  • Devaraju, A. “Recent Progress in TribologicalBehaviors of Nitride Treated Austenitic Stainless Steel-A Review”, European Journal of Scientific Research, Vol. 136, No.4, pages.394-405, (2015) (Scopus Indexed Journal). CLICK HERE
  • Devaraju, A and Pazhanivel, K “A FEA Study on Heat Of Ceramic And Steel Roller Bearings” International Journal of Applied Engineering Research, Vol.10, No.85,pages. 325-329, (2015)(Scopus Indexed Journal). CLICK HERE
  • Devaraju, A. “A Critical Review on Different Types of Wear of Materials”,International Journal of Mechanical Engineering and Technology, Vol.6, Issue 11, pages. 77-83,(2015)(Scopus Indexed Journal). CLICK HERE
  • BabuSasi Kumar, S and Chinnapandian, M. “Review On Comparison Of Differentsolar Techniques And Thermal Storage System” Journal. of Industrial Pollution Control, 33(2)(2017) pages.1098-1105 (Scopus Indexed Journal). CLICK HERE
  • BabuSasi Kumar, Sand Chinnapandian, M. “The Performance Study Of A Solar Flat Plate Type Air Collector With Natural And Forced Convection” Journal of Industrial Pollution Control, B33(2) (2017) pages. 1155-1162(Scopus Indexed Journal). CLICK HERE
  • Gopi. R “Experimental Investigation Of Flat Plate Collector With Cylindrical Fins In A Solar Air Heater” Journal of Industrial Pollution Control, 33(2) (2017) pages. 1128-1131(Scopus Indexed Journal). CLICK HERE
  • Devaraju, A.“Development of Austenitic Stainless Steel Type 316ln-A Review” International Journal of Design and Manufacturing Technology (IJDMT)Volume 6, Issue 2, J pages. 48-53, (2015). CLICK HERE
  • Devaraju, A and Pazhanivel, K “A Study on Stress Analysis for Design of Pressure Vessel”, InternationalJournal of Mechanical and Production Engineering, Vol.3, Issue 11, pages. 98-101,(2015). CLICK HERE
  • Devaraju, A.“Influence of Fiber Percentage on Mechanical Properties of Hybrid Composite Materials” Journal of Material Science and Mechanical Engineering, Volume 2, Issue 13; pages. 1-5 (2015). CLICK HERE
  • Devaraju, A.“An Experimental study on TIG welded joint between Duplex Stainless Steel and 316L Austenitic Stainless Steel” International Journal of Mechanical Engineering (SSRG-IJME)volume 2 Issue 10, pages 1-4, (2015). CLICK HERE
  • Manikandan, N, Ramesh Raju,Palanisamy D and D Arulkirubakaran “Experimental Investigations on Spark Erosion Machining of Haste Alloy C-276 Using Taguchi’s Approach” Manufacturing Technology Today, Vol. 16, Issue.11, pages 3-11 (2017). CLICK HERE
  • MadhavaSelvan V, Ramesh Raju, N Manikandan,Palanisamy D, Arulkirubakaran D “Recent Development of Laser Based Treatment on Titanium Alloys: From Coating to Treatment – A Review” International Journal of Engineering Research in Mechanical and Civil Engineering, Vol. 2, issue. 3, Pages 505-512 (2017). CLICK HERE
  • Babu K, Gnanavelbabu A, Vignesh K “Design, Fabrication and Testing Of Brass Honeycomb Sandwich Structures” Technical Research Organisation India, Vol.4, issue-7 pages 45-49(2017). CLICK HERE
  • AmudaPriyaDharshinee, P, Sakthisudhan, K and A.Devaraju, “Banana Fiber Woven Mobile Pouch Design & Development of Emi/Emc Mitigation Design For Mobile Applications”,International Journal of Advanced in Management, Technology and Engineering Sciences, Volume 7 Issue 10 (2017), pages. 23-27(UGC Approved Journal). CLICK HERE
  • Pramila J, Mohan D and Devaraju A. “Removal of Toxic Metal Ion using Poly m-phenylene (Isophthalamide) Ultrafiltration Membranes”, International Journal of Advanced in Management, Technology and Engineering Sciences, Volume 7 Issue 10 (2017), pages. 94-99(UGC Approved Journal). CLICK HERE
  • Ramesh Raju, Manikandan, N,Palanisamy, D,Arulkirubakaran, D and Sambathkumar, S. “Recent Strategies in Laser Based Machining for the Enhanced Service Life of Nickel Based Super Alloys” International Journal of Advanced in Management, Technology and Engineering Sciences, Vol 7, Issue 11, pages 220-224(2017) (UGC Approved Journal). CLICK HERE
  • MuraliPonnusamy “Modeling and Heat Transfer Analysis of Double pipe Heat Exchanger using Computational Fluid Dynamics (CFD)” International Journal of Advanced in Management, Technology and Engineering Sciences, Vol 7, Issue 9, pages 159-166(2017) (UGC Approved Journal). CLICK HERE
  • Nalini. B “Design and Development of Blood Sample Analyser Using Intelligent Machine Vision Techniques”International Journal of Advanced in Management, Technology and Engineering Sciences, Vol 7, Issue 9,pages 118-122(2017)(UGC Approved Journal). CLICK HERE
  • Ramkumar, S and Umapathi, D.“Analysis and Optimisation of Piston with Different Alloying material Using FEA”International Journal of Advanced in Management, Technology and Engineering Sciences, Vol 7, Issue 9,pages 100-111(2017)(UGC Approved Journal). CLICK HERE
  • Umapathi. D “Experimental Investigation of Bio-Diesel from Papaya seed oil as a Fuel in Diesel Engine ”International Journal of Advanced in Management, Technology and Engineering Sciences, Vol 7, Issue 9,pages 85-91(2017).(UGC Approved Journal). CLICK HERE
  • Vignesh, S and Nandhakumar,R“Performance and Evaluation of Domestical Refrigerator Using Liquefied Petroleum Gas Cylinder”International Journal of Advanced in Management, Technology and Engineering Sciences, Issue 9,pages 147-153(2017) (UGC Approved Journal). CLICK HERE
  • Raji, G. “Performance Analysis of Fuel Injector in CRDI System by ICEM CFD”Journal of Chemical and Pharmaceutical Sciences,Issue 13, (2017), pages. 32-36 (UGC Approved Journal). CLICK HERE
publications